Alle Produkte
EN

News

News

Startseite>News

Wartung des PVC-Bodens!

Ansichten:73 Autor: Site Editor Veröffentlichungszeit: 2020-07-13 Herkunft: Site

With the increase in the use of PVC floors, the maintenance problems of PVC floors have also become more prominent. Many units have spent a lot of money on PVC floor modification. Due to the lack of professional maintenance knowledge, the maintenance effect is not obvious. Improper long-term maintenance will cause the PVC floor to lose gloss, turn yellow, turn black, breakage, etc., far from the expected effect, and directly affect daily use.

 

1. Purpose of cleaning and maintenance:

 

1) Improve appearance: timely remove the dirt generated in daily use, so that the PVC floor can fully display its extraordinary appearance and natural gloss.

 

2) Protect the floor: protect the PVC floor from accidental chemicals, cigarette butt marks, shoe prints, oil and water, etc., to minimize the wear of the surface, so that the durability of the floor itself can be fully exerted, thus extending the floor Service life.

 

3) Convenient care: Due to the compact surface structure and special treatment of PVC floor itself, pay attention to daily cleaning and maintenance, which can make the floor easier to care and extend

 

2. Nursing considerations:

 

1) All kinds of dirt on the ground should be removed in time.

 

2) It is absolutely forbidden to immerse the floor in open water. Although some grounds use water-proof glue to cut off the water source (such as floor drain, water room, etc.), long-term immersion in water will seriously affect the service life of the floor. In the cleaning process, use a water suction machine to absorb the sewage in time.

 

3) It is absolutely forbidden to use hard and rough cleaning tools (such as steel balls, scouring pads, etc.) to prevent sharp objects from hitting the floor.

 

4) It is strongly recommended to place rubbing pads at the entrance of public places with high traffic to prevent dirt and sand from being brought into the ground.

 

 

3. Maintenance methods at different stages:

 

(1) Cleaning and maintenance after floor laying/before use

 

    1. First remove dust and debris from the floor surface.

 

    2. Use a floor cleaner to add red abrasive discs or similar products to clean at a low speed to remove grease, dust and other dirt on the floor surface, and use a water suction machine to absorb the sewage.

 

    3. Wash with clean water and blot dry.

 

    4. According to needs, you can apply 1-2 layers of high-strength facial wax.

 

    Tools: grinder red abrasive disc water absorption machine wax tow water machine, ground cleaner

 

 

(2) Daily cleaning and maintenance

 

    1. Push the dust or vacuum the dust. (Drop the dust agent on the floor, dry it and push the dust.)

 

    2. Wet drag. (Dilute 1:20 with water on the floor cleaning polish and mop the floor with a semi-moist mop.)

 

    Cleaning agent: floor drag dust agent floor cleaning polish

 

    Tool: dust push mop

 

(3) Regelmäßige Reinigung und Wartung

 

    1. Push the dust or vacuum the dust.

 

    2. The floor cleaning polish is diluted with water at 1:20, mopping or rubbing with a high-speed polishing machine and red abrasive discs.

 

    3. Apply 1-2 layers of high-strength facial wax.

 

    4. According to the need, it can cooperate with high-speed polishing machine plus white polishing pad polishing treatment.

 

    Cleaner: Floor cleaning polish high-strength surface wax

 

    Tools: Dust push grinder red white abrasive disc water absorption machine wax mop

 

 

4. Treatment of special dirt:

 

1) Oil stains: local oil stains, pour the strong degreaser stock solution directly on the towel to wipe; for large areas of oil stains, dilute the degreaser according to 1:10, then use a floor cleaner and a red scrub pad to clean at a low speed.

 

  2) Black offset printing: use spray cleaning and maintenance wax with high-speed polishing machine plus white polishing pad polishing treatment. For long-term black offset printing, you can pour the strong offset remover directly on the towel and wipe it.

 

2) Glue or chewing gum: use professional strong glue remover to pour directly on the towel to remove.