pob Categori
EN

Newyddion

Newyddion

Hafan>Newyddion

How much do you know about the whole process of PVC plastic floor waxing?

Views:88 Awdur: Golygydd Safle Amser Cyhoeddi: 2019-06-03 Tarddiad: Safle

The problems of wear, stains, UV surface performance, and incorrect cleaning and painting of plastic floors after long-term use have affected the appearance of the floor and are not conducive to the normal use of plastic floors. In order to maintain the beauty and good performance of plastic floors, professional maintenance and repair of plastic floors is very necessary. When plastic floor maintenance is involved, plastic floor waxing is indispensable. Then, the whole process of PVC plastic floor waxing, you know how much ?

Before waxing PVC plastic floors, it is the job of cleaning and curing plastic floors. It is better to choose plastic floor maintenance when the weather is better. Avoid construction in rainy days with high humidity and low temperatures. If the humidity is too high, white turbidity is likely to occur, and the floor wax below 5 degrees Celsius is easy to harden, which is not conducive to construction. 

After cleaning the plastic floor area that needs to be waxed, make sure that there is no dust or other dirt before waxing to prevent the waxing finish. After cleaning, you need to wait for the water on the plastic floor to dry completely before waxing.

 After fully mixing the plastic floor wax, evenly dip the floor wax with a clean mop or sponge. You can conduct a local trial in an unobtrusive place and confirm that there is no abnormality before waxing the whole. Then use a clean rag or special waxing dust to fully dip the plastic floor wax, and apply it carefully according to the same direction. The speed should not be too fast, do not miss the coating or uneven thickness, to maintain uniform thickness.

After applying wax twice (each layer of wax must wait for a layer of wax to dry out before the next layer of wax), after completely dry, polish the surface with fine sandpaper or soft cloth. Allow the surface to dry for at least 24 hours after completion, and do not step on it. After a series of maintenance and waxing, the plastic floor can restore the original gloss of the plastic floor and extend its service life, bringing unique and amazing effects.